Categories technology

Taoglas 2G/3G/4G Flexible MIMO Antenna – RF Design

FXUB71 Wide Band Flex 2xMIMO 150mm Ø1.37

The patent pending FXUB71 antenna is an industry leading embedded LTE 2*2 MIMO flexible polymer monopole type antenna for worldwide LTE applications, which also works equally well on 2G and 3G applications. The antenna comes with a micro coax cable and connector, and has good efficiency and isolation between ports, critical for optimal LTE wireless performance.

Typical applications:
– LTE Gateways and Routers
– High speed HD streaming
– LTE Access Points
– High capacity MIMO networks for Public Transportation

With over 40% efficiency on all bands, isolation performance between the two ports is under -10dB in all bands. The antenna has been designed in a slim rectangular form-factor, with its own automotive quality 3M 467 adhesive backing tape, to ensure good isolation and convenient installation into typical M2M/IOT devices. Simply peel and stick onto your plastic housing.
The antenna is tuned to work on a reference ABS plastic of 2mm of thickness which is a common standard for most device plastics. Cable routing has been carefully planned to ensure no cross-over of cable, and a logical and hassle free installation. Like all such antennas, care should be taken to mount the antenna at least 10mm from metal components or surfaces, and ideally 20mm for best radiation efficiency.
Before integration of the antenna in your device, especially if you require PTCRB or US network approvals, please contact Taoglas regional sales office for technical support.
Cable length and connector type are fully customizable.

Part No.:
FXUB71.A.07.C.001

Product Name:
Embedded Flexible 4G LTE MIMO 2*2 Antenna
with 150mm 1.37 IPEX MHFI (U.FL)
698 MHz to 3GHz

Features:
Worldwide LTE Functionality with 3G and 2G
(HSPA / GSM / CDMA /DCS /PCS / WCDMA / UMTS / GPRS / EDGE / GPS / 2.4GHz Wi-Fi)
240mm*21mm*0.15mm
150mm Φ1.37 Coaxial cable
I-PEX MHFI HT (U.FL compatible) Connector
3M Adhesive Tape for Peel and Stick Mounting
Cable and connector are customizable

Product Links

http://rf-design.co.za/wp-content/uploads/2017/04/Taoglas-Flexible-MIMO-Antenna.png 319 832 RF Design http://rf-design.co.za/wp-content/uploads/2016/02/RF-Design-Logo.png RF Design2017-04-03 07:49:162017-04-03 07:49:16Taoglas 2G/3G/4G Flexible MIMO Antenna

http://rf-design.co.za/taoglas-2g3g4g-flexible-mimo-antenna/

Leave a Reply

Your email address will not be published. Required fields are marked *